Internal Pole Routing


Tools

  • 1/4" phillips screwdriver for MAKO Mount access door
  • 3/16" hex screwdriver for Spine access door.

Junction Box

If a pole has multiple MAKO mounts, it might be necessary to route the cables into a junction box at the top of the pole before connecting them to the mounts, as illustrated in the image above. The junction box can be over a handhole as well as on the top of the pole as shown.





Rear Mount Connection

This is the recommended method of connection for internal pole routing.






Handhole Access


Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.